HP Slate 10 HD 3500ca HP Slate10 HD and HP Slate7 HD Maintenance and Service G - Page 33

Audio board, disconnect the card reader board cable from the audio board.

Get HP Slate 10 HD 3500ca PDF manuals and user guides View all HP Slate 10 HD 3500ca manuals
Add to My Manuals
Save this manual to your list of manuals

Page 33 highlights

Audio board Description Audio board (includes audio jack and bracket) Spare part number 744537-001 Before removing the audio board, follow these steps: 1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system. 2. Disconnect the power from the tablet by unplugging the power cord from the tablet. 3. Disconnect all external devices from the tablet. 4. Remove the back cover (see Back cover on page 18). 5. Disconnect the battery cable from the system board (see Battery on page 20). Remove the audio board: 1. Release the ZIF connector (1) to which the card reader board cable is attached, and then disconnect the card reader board cable from the audio board. 2. Remove the two Phillips PM2.0×2.75 screws (2) that secure the audio board and bracket to the display panel assembly. 3. Remove the audio board bracket (3) and the audio board (4). HP Slate10 HD 27

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
Audio board
Description
Spare part number
Audio board (includes audio jack and bracket)
744537-001
Before removing the audio board, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2.
Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.
Disconnect all external devices from the tablet.
4.
Remove the back cover (see
Back cover
on page
18
).
5.
Disconnect the battery cable from the system board (see
Battery
on page
20
).
Remove the audio board:
1.
Release the ZIF connector
(1)
to which the card reader board cable is attached, and then
disconnect the card reader board cable from the audio board.
2.
Remove the two Phillips PM2.0×2.75 screws
(2)
that secure the audio board and bracket to the
display panel assembly.
3.
Remove the audio board bracket
(3)
and the audio board
(4)
.
HP Slate10 HD
27