HP Slate 10 HD 3500ca HP Slate10 HD and HP Slate7 HD Maintenance and Service G - Page 52

Antenna modules, Remove the battery see

Page 52 highlights

4. Remove the system board (4). Reverse this procedure to install the system board. Antenna modules Description 3G antenna module WiFi antenna module Spare part number 747947-001 743045-001 Before removing the antenna modules, follow these steps: 1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system. 2. Disconnect the power from the tablet by unplugging the power cord from the tablet. 3. Disconnect all external devices from the tablet. 4. Remove the back cover (see Back cover on page 37). 5. Remove the battery (see Battery on page 38). 6. Remove the system board (see System board on page 43). 46 Chapter 5 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63

4.
Remove the system board
(4)
.
Reverse this procedure to install the system board.
Antenna modules
Description
Spare part number
3G antenna module
747947-001
WiFi antenna module
743045-001
Before removing the antenna modules, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2.
Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.
Disconnect all external devices from the tablet.
4.
Remove the back cover (see
Back cover
on page
37
).
5.
Remove the battery (see
Battery
on page
38
).
6.
Remove the system board (see
System board
on page
43
).
46
Chapter 5
Removal and replacement procedures