HP Spectre 15-bl100 Maintenance and Service Guide - Page 42
USB/audio/power connector board
View all HP Spectre 15-bl100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
USB/audio/power connector board USB/audio/power connector board and cable spare part kits include replacement rubber feet. Description USB/audio/power connector board USB/audio/power connector board cable Spare part number 913006-001 912993-001 Before removing the USB/audio/power connector board, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 22). 5. Disconnect the battery cable from the system board (see Battery on page 23). CAUTION: To prevent damage to internal components, be sure to disconnect the battery cable from the system board before removing the USB/audio/power board. You do not need to remove the battery to remove the board. Remove the USB/audio/power connector board: 1. Lift the Mylar tape up from the board (1). 2. Disconnect the cable from the connector on the bottom of the board (2). 3. Remove the Phillips PM2.0×3.0 screw (3) that secures the board to the computer. 36 Chapter 5 Removal and replacement procedures