HP Spectre 15-bl100 Maintenance and Service Guide - Page 49
Volume board
View all HP Spectre 15-bl100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Volume board Volume board and cable spare part kits include replacement rubber feet. Description Volume board Volume board cable Spare part number 913634-001 913633-001 IMPORTANT: You must remove the battery and right speaker to remove the volume board. The volume board cable routes under the right speaker. Before removing the volume board, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 22). 5. Remove the battery (see Battery on page 23). 6. Remove the right speaker (see Speakers on page 33). Remove the volume board: 1. Remove the Phillips PM2.0×3.5 screw (1) that secures the volume board to the computer. 2. Lift and rotate the board so you can access the connector underneath (2). 3. Disconnect the cable from the ZIF connector on the bottom of the board (3). Volume board 43