HP Spectre 15-bl100 Maintenance and Service Guide - Page 53
Display assembly
View all HP Spectre 15-bl100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Display assembly Description Display assembly (full hinge-up) Spare part number 911082-001 Before removing the display assembly, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 22). 5. Disconnect the battery cable from the system board (see Battery on page 23). CAUTION: To prevent damage to internal components, be sure to disconnect the battery cable from the system board before removing the display. You do not need to remove the battery to remove the display. Remove the display assembly: 1. Open the computer all the way until it is flat (180 degrees). 2. Disconnect the webcam cable from the system board (2). 3. Disconnect the antenna cables from the WLAN module (3). 4. Disconnect the display panel cable from the ZIF connector on the system board (4). 5. Remove the four Phillips M2.5×4.0 screws (5) that secure the display assembly to the computer. Display assembly 47