HP StorageWorks 1606 DCFM Installation, Migration, and Transition Guide - Supp - Page 248

3 WebTools Functionality WebTools Functionality Some functionality formerly residing in the WebTools 6.0 application has been moved to DCFM. The following table details these changes. TABLE 23 Function WebTools functionality WebTools 6.0 DCFM Comments FCIP Tunnel Configuration Port Admin Module > GigE tab GigE Ports Interface GigE Ports Route Fabric Summary Port Admin Module > GigE tab Port Admin Module > GigE tab Reports > Fabric Summary Fabric Events Zoning Zone database summary print Monitor > Fabric Events Zone Admin Define Device Alias Remove Offline or Inaccessible Devices Zone Admin Zone Admin Device Accessibility Matrix (Enterprise edition only) Zone Admin Analyze Zone Config Zone Admin (Enterprise edition only) Configure > FCIP Tunnel Configure > FCIP Tunnel Configure > FCIP Tunnel Monitor > Reports > Fabric Summary Report Monitor > Logs > Events Viewing FCIP tunnels is still supported in WebTools 6.1.1, but New, Edit Config, and delete are only available in DCFM. Configure > Zoning Zoning report for both online and offline database. Configure > Zoning Configure > Zoning Replace/Replace all zone members by selecting the offline devices from the zone tree. Offline devices have an unknown overlay badge with good visibility. Configure > Zoning The Compare dialog provides the Storage-Host and Host-Storage view in a tree representation that is comparable to the Device Accessibility Matrix when all devices are selected. 1 Configure > Zoning: Reverse Find in the Zoning dialog provides the view of the zoned and unzoned devices in the fabric if all zone members are selected for Find. 2 Device Tree and Topology: Connected End Devices - Custom Display from the top level in the main frame provides the device tree and topology view for all the zoned devices if all zones are selected in the active zone configuration. 232 DCFM Installation, Migration, and Transition Guide 53-1001360-01