HP StorageWorks 1606 DCFM Installation, Migration, and Transition Guide - Supp - Page 52
Server Port Configuration, Syslog Port Number
View all HP StorageWorks 1606 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
1 Installing Professional Plus edition on UNIX systems 12. Complete the following steps on the Server Port Configuration screen. NOTE Do not use port 2638 for any of these port numbers. Port 2638 is used internally by the server. 24600 FIGURE 18 Server Port Configuration screen a. Enter a port number in the Syslog Port Number field (default is 514). NOTE If the default syslog port number is already in use, you will not receive any syslog messages from the device. b. Enable SSL by selecting the SSL Enabled check box. c. Enter a port number in the Web Server Port Number field (default is 443 if SSL Enabled is selected; otherwise, the default is 80). d. Enter a port number in the SNMP Port Number field (default is 162). e. Enter a port number in the Starting Port Number field (default is 24600). NOTE The server requires 16 consecutive free ports beginning with the starting port number. f. Click Next. If you enter a Syslog port number already in use, a message displays. Click OK to close the message. Edit the Syslog port number and click Next. If you enter a port number already in use, a Warning displays next to the associated port number field. Edit that port number and click Next. 13. Verify your configuration and license information on the Server License Summary screen and click Next. 14. Select the Start Client check box, if necessary, on the Start Server screen and click Finish. After all of the DCFM services are started, the Log In dialog box displays. 36 DCFM Installation, Migration, and Transition Guide 53-1001360-01