HP StorageWorks 1606 DCFM Installation, Migration, and Transition Guide - Supp - Page 32
Web Server Port Number, SNMP Port Number
View all HP StorageWorks 1606 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
1 Installing Professional edition on UNIX systems 11. Complete the following steps on the Server Port Configuration screen. NOTE Do not use port 1527 for any of these port numbers. Port 1527 is used internally by the server. FIGURE 6 Server Port Configuration screen a. Enter a port number in the Syslog Port Number field (default is 514). NOTE If the default syslog port number is already in use, you will not receive any syslog messages from the device. b. Enable SSL by selecting the SSL Enabled check box. c. Enter a port number in the Web Server Port Number field (default is 443 if SSL Enabled is selected; otherwise, the default is 80). d. Enter a port number in the SNMP Port Number field (default is 162). e. Enter a port number in the Starting Port Number field (default is 24600). NOTE The server requires 13 consecutive free ports beginning with the starting port number. f. Click Next. If you enter a Syslog port number already in use, a message displays. Click OK to close the message. Edit the Syslog port number and click Next. If you enter a port number already in use, a Warning displays next to the associated port number field. Edit that port number and click Next. 12. Verify your configuration information on the Server License Summary screen and click Next. 13. Select the Start DCFM Pro Client check box, if necessary, on the Start Server screen and click Finish. After all of the DCFM services are started, the Log In dialog box displays. 16 DCFM Installation, Migration, and Transition Guide 53-1001360-01