HP StorageWorks 8/40 Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 156
FABR-1016, Message, Probable Cause, Recommended, Action, Severity, fabricPrincipal, switchDisable
View all HP StorageWorks 8/40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 156 highlights
15 FABR-1016 FABR-1016 Message , [FABR-1016], ,, WARNING, , ficonMode is enabled. Probable Cause Indicates that FICON mode is enabled on the switch through a user interface command. Recommended No action is required. Action Severity WARNING FABR-1017 Message , [FABR-1017], ,, WARNING, , ficonMode is disabled. Probable Cause Indicates that FICON mode is disabled on the switch through a user interface command. Recommended No action is required. Action Severity WARNING FABR-1018 Message , [FABR-1018], ,, WARNING, , PSS principal failed (: ). Probable Cause Indicates that a failure occurred when trying to set the principal switch using the fabricPrincipal command. The message notifies the user that the switch failed to become the principal switch because either: • The switch joined an existing fabric and bypassed the F0 state. • The fabric already contains a principal switch that has a lower world-wide name (WWN). Recommended Action Make sure that no other switches is configured as the principal switch. Force a fabric rebuild by using the switchDisable and switchEnable commands. Refer to the Fabric OS Command Reference for more information the fabricPrincipal command. Severity WARNING FABR-1019 Message , [FABR-1019], , FFDC, CRITICAL, , Critical fabric size () exceeds supported configuration (). 104 Fabric OS Message Reference 53-1000600-02