HP StorageWorks 8/40 Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 488
SULB-1025, Severity, Message, Probable Cause, Recommended, Action, firmwareCommit, firmwareDownload
View all HP StorageWorks 8/40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 488 highlights
69 SULB-1025 Severity WARNING SULB-1025 Message , [SULB-1025], ,, WARNING, , The blade in slot will reboot with the new firmware. Probable Cause Indicates that new firmware has been downloaded to the specified AP blade and that the AP blade will reboot to active it. Recommended Wait for the blade to reboot. Action Severity WARNING SULB-1026 Message , [SULB-1026], , AUDIT, WARNING, , Firmware commit operation started on the blade in slot . Probable Cause firmwareCommit has started on the specified blade. The operation may be a normal part of firmwareDownload, or it may have started to repair the secondary partition of the blade if the secondary partition is corrupted. Recommended No action is required. Action Severity WARNING SULB-1030 Message , [SULB-1030], AUDIT, WARNING, , The switch has rebooted during relocating the internal firmware image. Probable Cause The error may be caused by an unexpected disruption of the firmwareDownload command, for example, by powering the switch off and on in the middle of a firmwareDownload. The error may also be caused by persistent storage hardware failure or by a software error. Recommended firmwareDownload will continue after the switch has rebooted. Run the firmwareDownloadStatus Action command to monitor progress. If the problem persists, contact your switch service provider. Severity WARNING SULB-1031 Message , [SULB-1031], , AUDIT, WARNING, , The switch is relocating an internal firmware image. 436 Fabric OS Message Reference 53-1000600-02