HP StorageWorks 8/40 Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 239
FSSM System Messages, FSSM-1002
View all HP StorageWorks 8/40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 239 highlights
Chapter FSSM System Messages 29 FSSM-1002 Message , [FSSM-1002], ,, INFO, , HA State is in sync. Probable Cause Indicates that the high availability (HA) state for the active control processor (CP) is in synchronization with the HA state of the standby CP. If the standby CP is healthy, then a failover is nondisruptive. For more information on the haFailover command, refer to the Fabric OS Command Reference. Recommended No action is required. Action Severity INFO FSSM-1003 Message , [FSSM-1003], ,, WARNING, , HA State out of sync. Probable Cause Indicates that the high availability (HA) state for the active control processor (CP) is out of synchronization with the HA state of the standby CP. If the active CP failover occurs when the HA state is out of sync, the failover is disruptive. Recommended Action If this message was logged as a result of a user-initiated action (such as running the switchReboot command), then no action is required. Otherwise, issue the haSyncStart command on the active CP and try resynchronizing the HA state. If the HA state does not become synchronized, run the haDump command to diagnose the problem. If the problem persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING FSSM-1004 Message , [FSSM-1004], ,, INFO, , Incompatible software version in HA synchronization. Fabric OS Message Reference 187 53-1000600-02