HP StorageWorks 8/40 Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 423
SEC-1034, Probable Cause, secPolicyAdd, secPolicyCreate, Recommended, Action, Severity, Message
View all HP StorageWorks 8/40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 423 highlights
66 SEC-1034 Probable Cause Indicates that a member parameter in the secPolicyAdd command is invalid (e. g., it may include an invalid character, such as an asterisk). A valid switch identifier (a WWN, a domain ID, or a switch name) must be provided as a member parameter in the secPolicyAdd command. Only the secPolicyCreate command supports use of the asterisk for adding switches to policies. Recommended Action Run the secPolicyAdd command using a valid switch identifier (WWN, domain ID, or switch name) to add specific switches to the switch connection control (SCC) policy. Refer to the Fabric OS Command Reference for more information on the secPolicyAdd and secPolicyCreate commands. Severity ERROR SEC-1034 Message , [SEC-1034], ,, ERROR, , Invalid member . Probable Cause Indicates that the input list has an invalid member. Recommended Verify the member names, and input the correct information. Action Severity ERROR SEC-1035 Message , [SEC-1035], ,, ERROR, , Invalid device WWN . Probable Cause Indicates that the specified world-wide name (WWN) is invalid. Recommended Enter the correct WWN value. Action Severity ERROR SEC-1036 Message , [SEC-1036], ,, ERROR, , Device name is invalid due to a missing colon. Probable Cause Indicates that one or more device names mentioned in the securePolicyCreate or securePolicyAdd command does not having the colon character as required. Recommended Run the secPolicyCreate or secPolicyAdd command with a properly formatted device name Action parameter. Severity ERROR Fabric OS Message Reference 371 53-1000600-02