HP StorageWorks 8/40 Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 79
AG-1015, Severity, Message, Probable Cause, Recommended, Action, supportFtp, supportsave, mapshow
View all HP StorageWorks 8/40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
AG-1015 2 Severity INFO AG-1015 Message , [AG-1015], ,, WARNING, , Unable to find online N_Ports to connect to the fabric. Probable Cause Either no other N_Port is configured or all N_Ports are currently offline. Recommended Action Please check whether or not any other N_Port is configured. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportsave command and contact your switch service provider. Severity WARNING AG-1016 Message , [AG-1016], ,, INFO, , Failing over F_Ports mapped to N_Port to other N_Port(s). Probable Cause Indicates that the specified N_Port has failed to come online. All F_Port(s) mapped to this N_Port are being failed over to other active N_Port(s). Recommended Run the ag --mapshow command to display updated F_Port to N_Port mapping. Action Severity INFO AG-1017 Message , [AG-1017], ,, WARNING, , No N_Port(s) are currently Online. Probable Cause Indicates that no N_Port(s) are currently configured in the system or all configured N_Port(s) have failed to come online. Recommended Run switchShow to display the status of all ports in the system. Run portCfgShow to display a list of Action ports currently configured as N_Port(s). Severity WARNING AG-1018 Message Probable Cause , [AG-1018], ,, ERROR, , Host port should not be connected to port , which is configured as N_Port. Indicates that Initiator/Target is erroneously connected to a port configured for N_Port operation. Fabric OS Message Reference 27 53-1000600-02