HP StoreOnce D2D4324 HP D2D25xx, 41xx and 43xx Backup System user guide (EH985 - Page 52
Disk (Status), This is not displayed with HP D2D4100 and HP D2D4300 Series Backup Systems.
![]() |
View all HP StoreOnce D2D4324 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Physical disks When you select a shelf, the disks within it are displayed in the Physical Disks section. Use the information in this section to identify disks that may be failing or disks that are approaching capacity. IMPORTANT: If you need to replace a disk, it is very important to obtain the serial number and the physical location of the failed disk from this page before you replace it. We strongly recommend that you use this page to beacon a disk within the StoreOnce Backup System. The Beacon LED on the front of the individual disk will show solid blue. Disk: State: Description: Serial No: FW Version: Size: Spare: Beacon: This indicates the physical location of the disk and is useful if you need to replace a disk. Always double check against the serial number after removing a disk. This is the status of the physical disk. Possible states are - OK, Failed, Missing, Too Small, Rebuilding, Predictive Failure. This is the product number of the disk. This is the serial number of the disk. Always make a note of this before replacing a failed disk. This is the software version of the disk. It may be useful for troubleshooting and when replacing a disk. This is 2 TB (HP D2D4324), 1 TB (HP D2D4112/4312) or 500 GB (HP D2D4106). This shows the size of each disk in your StoreOnce Backup System. The sum of the disks gives the total raw capacity available. However, the usable capacity is always less due to the RAID configuration used across the disks. See the Storage glossary entry for more information. This indicates the location of the online spare disk. It is normally: • HP D2D4300 Series: Disk 1 for the internal shelf and Disk 12 for an expansion shelf • HP D2D4100 Series: Disk 12 The box will be unchecked if a disk fails and the online spare takes over from the failed disk. Once you replace the disk and the RAID rebuilds, the box against Disk 1 or Disk 12 is checked again as it resumes its function of online spare disk Check this box to beacon the LED on the front of the disk. This helps you identify the disk that needs attention and the shelf that contains it. Disk (Status) This page provides information about total disk usage and disk usage for each library and NAS share configured on the HP D2D2500 Series Backup System. It also shows deduplication ratios. Use it to check when the total disk space is reaching capacity. NOTE: This page is not displayed with HP D2D4100 and HP D2D4300 Series Backup Systems. 52 Status
![](/manual_guide/products/hewlettpackard-d2d2502i-hp-d2d25xx-41xx-43xx-backup-user-guide-eh98590955-2013-dfad14b/52.png)