HP Stream 11-y000 Maintenance and Service Guide - Page 37
and the bottom cover., or similar thin, plastic tool between the front edge of the keyboard/top cover
View all HP Stream 11-y000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
NOTE: When replacing the keyboard/top cover, be sure that the TouchPad board (see TouchPad board on page 45) and power button board (see Power button board on page 44) are removed from the defective keyboard/top cover and installed on the replacement keyboard/top cover. Remove the keyboard/top cover: NOTE: The number of screws may differ for your computer. 1. Remove the seven Phillips M2.0 × 5.7 screws that secure the keyboard/top cover to the bottom cover. 2. Turn the computer right side up with the front toward you. 3. Open the computer as far as it will open. 4. Insert a case utility tool (1) or similar thin, plastic tool between the front edge of the keyboard/top cover and the bottom cover. 5. Lift the front edge (2) of the keyboard/top cover until it separates from the front edge of the bottom cover. 6. Disconnect the battery cable from the system board (1). Component replacement procedures 29