HP Stream 11-y000 Maintenance and Service Guide - Page 43
WLAN module, Remove the Phillips M2.0 × 3.3 screw
View all HP Stream 11-y000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
WLAN module Description Intel Dual Band Wireless-AC 7265 802.11ac 2 × 2 WiFi + Bluetooth 4.2 Combo Adapter D1 (HP Stream Laptop PC with Intel Celeron N4000 only) Intel Dual Band Wireless-AC 7265 802.11ac 2 × 2 WiFi + Bluetooth 4.2 Combo Adapter D0 Realtek RTL8822BE 802.11ac 2 × 2 WiFi + BT 4.2 Combo Adapter (MU-MIMO supported) Intel Dual Band Wireless-AC 9560 802.11ac 2 × 2 WiFi + Bluetooth 5.0 Combo Adapter (Pro G5 models only) Spare part number 901229-855 793840-005 924813-855 L22634-005 CAUTION: To prevent an unresponsive system, replace the wireless module only with a wireless module authorized for use in the computer by the governmental agency that regulates wireless devices in your country or region. If you replace the module and then receive a warning message, remove the module to restore device functionality, and then contact technical support. Before removing the WLAN module, follow these steps: 1. Prepare the computer for disassembly (Preparation for disassembly on page 26). 2. Remove the computer feet (see Computer feet on page 26). 3. Remove the keyboard/top cover (see Keyboard/top cover on page 28). 4. Disconnect the battery (see Battery on page 34). Remove the WLAN module: 1. Disconnect the WLAN antenna cables (1) from the terminals on the WLAN module. NOTE: The #1 WLAN antenna cable connects to the WLAN module #1/Main terminal. The #2 WLAN antenna cable connects to the WLAN module #2/Aux terminal. 2. Remove the Phillips M2.0 × 3.3 screw (2) that secures the WLAN module to the bottom cover. (The WLAN module tilts up.) Component replacement procedures 35