HP Stream 11-y000 Maintenance and Service Guide - Page 38
to which the TouchPad board cable is attached, and then disconnect, Remove the keyboard/top cover
![]() |
View all HP Stream 11-y000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
7. Release the zero insertion force (ZIF) connector (2) to which the power button board cable is attached, and then disconnect the power button board cable from the system board. 8. Release the ZIF connector (3) to which the keyboard cable is attached, and then disconnect the keyboard cable from the system board. 9. Release the ZIF connector (4) to which the TouchPad board cable is attached, and then disconnect the TouchPad board cable from the system board. 10. Remove the keyboard/top cover (5). Reverse this procedure to install the keyboard/top cover. 30 Chapter 5 Removal and replacement procedures for authorized service provider parts
![](/manual_guide/products/hewlettpackard-stream-11y000-maintenance-service-guide-4256528/38.png)
7.
Release the zero insertion force (ZIF) connector
(2)
to which the power button board cable is attached,
and then disconnect the power button board cable from the system board.
8.
Release the ZIF connector
(3)
to which the keyboard cable is attached, and then disconnect
the keyboard cable from the system board.
9.
Release the ZIF connector
(4)
to which the TouchPad board cable is attached, and then disconnect
the TouchPad board cable from the system board.
10.
Remove the keyboard/top cover
(5)
.
Reverse this procedure to install the keyboard/top cover.
30
Chapter 5
Removal and replacement procedures for authorized service provider parts