HP Stream 11-y000 Maintenance and Service Guide - Page 50
Connector board, the connector board cable from the system board.
View all HP Stream 11-y000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Connector board NOTE: The connector board spare part kit does not include the connector board cable. The connector board cable is available using spare part number 830759-001. Description Spare part number Connector board (includes audio jack and USB port) for use in HP Stream models and Pro G3 models 902960-001 Connector board (includes audio jack and USB port) for use on Pro G4 Education Edition models and Pro L02773-001 G5 models Before removing the connector board, follow these steps: 1. Prepare the computer for disassembly (Preparation for disassembly on page 26). 2. Remove the computer feet (see Computer feet on page 26). 3. Remove the keyboard/top cover (see Keyboard/top cover on page 28). 4. Remove the speakers (see Speakers on page 31). 5. Remove the battery (see Battery on page 34). Remove the connector board: 1. Release the ZIF connector (1) to which the connector board cable is attached, and then disconnect the connector board cable from the system board. 2. Detach the connector board cable (2) from the bottom cover. (The connector board cable is attached to the bottom cover with double-sided adhesive.) 3. Remove the two Phillips M2.0 × 3.3 screws (3) that secure the connector board to the bottom cover. 4. Remove the connector board (4). Reverse this procedure to install the connector board. 42 Chapter 5 Removal and replacement procedures for authorized service provider parts