HP Stream 11-y000 Maintenance and Service Guide - Page 42
Battery
View all HP Stream 11-y000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Battery Description Battery (2-cell, 37 Whr, 4.96 Ah, polymer, includes cable) Spare part number 824536-850 Before removing the battery, follow these steps: 1. Prepare the computer for disassembly (Preparation for disassembly on page 26). 2. Remove the computer feet (see Computer feet on page 26). 3. Remove the keyboard/top cover (see Keyboard/top cover on page 28). 4. Remove the speakers (see Speakers on page 31). NOTE: When replacing the battery, be sure that the RTC battery (select products only) (see RTC battery (select products only) on page 33) is removed from the defective battery and installed on the replacement battery. Remove the battery: 1. Disconnect the battery cable (1) from the system board. 2. Disconnect the RTC battery cable (select products only) from the system board (2). 3. Remove the four Phillips M2.0 × 3.3 screws (3) that secure the battery to the bottom cover. 4. Remove the battery (4). Reverse this procedure to install the battery. 34 Chapter 5 Removal and replacement procedures for authorized service provider parts