HP Stream 11-y000 Maintenance and Service Guide - Page 52
Power button board, Remove the two Phillips M2.0 × 2.8 screws
![]() |
View all HP Stream 11-y000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Power button board NOTE: The power button board spare part kit does not include the power button board cable. The power button board cable is available using spare part number 830757-001. Description Power button board for use in HP Stream models and Pro G3 models Power button board for use on Pro G4 Education Edition models and Pro G5 models Spare part number 902958-001 L02774-001 Before removing the power button board, follow these steps: 1. Prepare the computer for disassembly (Preparation for disassembly on page 26). 2. Remove the computer feet (see Computer feet on page 26). 3. Remove the keyboard/top cover (see Keyboard/top cover on page 28). 4. Disconnect the battery (see Battery on page 34). Remove the power button board: 1. Turn the keyboard/top cover upside down with the front toward you. 2. Detach the power button board cable (1) from the keyboard/top cover. (The power button board cable is attached to the keyboard/top cover with double-sided adhesive at two locations.) 3. Remove the two Phillips M2.0 × 2.8 screws (2) that secure the power button board to the keyboard/ top cover. 4. Remove the power button board (3) and cable. Reverse this procedure to install the power button board. 44 Chapter 5 Removal and replacement procedures for authorized service provider parts
![](/manual_guide/products/hewlettpackard-stream-11y000-maintenance-service-guide-4256528/52.png)