HP Surestore 125ex Hewlett-Packard SureStore 125ex Optical Jukebox User - Page 31
Re-insert the shipping screw that was removed when the jukebox was unpacked. This screw is 6/32 UNC-
![]() |
View all HP Surestore 125ex manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
1 NEXT PREVIOUS JUMP CONTENTS SETTING UP THE JUKEBOX The disk transport mechanism will lower to the chassis when power is turned off. The position at the bottom of the chassis is correct for insertion of the shipping screw (inserted in Step 6). 4. Remove the power cord from the wall/floor receptacle and the SCSI cable from the jukebox rear panel (see "1" and "3" on Figure 1-1). 5. Secure the mailslot by inserting the mailslot shipping bracket. Refer to page 6 for a description of this bracket. The shipping bracket slides into the mailslot easily, but will not latch. Place a piece of tape across the bracket to keep it in place. 6. Re-insert the shipping screw that was removed when the jukebox was unpacked. This screw is 6/32 UNC-2B cap screw 1 3/4 inches long. Re-install in the position shown in Figure 1-3. This screw is HP part number 2360-0551 and may be ordered from HP DIRECT. 7. Repack the jukebox in its original shipping carton. An alternative method of shipping is careful packaging and padded van shipping. INDEX 20
![](/manual_guide/products/hewlettpackard-surestore-125ex-hewlettpackard-surestore-125ex-optical-jukebox-user146s-guide-c111890000-9f82d67/31.png)