HP Surestore 125ex Hewlett-Packard SureStore 125ex Optical Jukebox User - Page 80
INIT ELEM displays
![]() |
View all HP Surestore 125ex manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
3 NEXT PREVIOUS JUMP CONTENTS INDEX OPERATING THE JUKEBOX Table 3-3: Troubleshooting Problem What to do Disk eject attempted but RESERVED displays The host computer or application software has reserved the disk for its own use. You will not be able to eject this disk. If you want to change this configuration, refer to the host and/or application software documentation. You want to stop a running test Press CANCEL. The current test loop continues until finished, then the test stops. INIT ELEM displays • The jukebox is inventorying the disks and drives. The jukebox or host computer may have initiated this process. Wait for this process to finish. • If this process does not complete, if READY does not appear in the display, or if no motion is seen in the jukebox, power cycle the jukebox.* • If the jukebox does not come up READY, call your service representative. * Before turning power to STANDBY, ensure that the SCSI bus is inactive and will remain inactive while you are troubleshooting. Going to STANDBY in this jukebox while the SCSI bus is active can cause data loss and/or SCSI bus problems. 41
![](/manual_guide/products/hewlettpackard-surestore-125ex-hewlettpackard-surestore-125ex-optical-jukebox-user146s-guide-c111890000-9f82d67/80.png)