HP Surestore 125ex Hewlett-Packard SureStore 125ex Optical Jukebox User - Page 53
No Config, Conf 17
![]() |
View all HP Surestore 125ex manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
3 NEXT PREVIOUS JUMP CONTENTS INDEX OPERATING THE JUKEBOX The security code 0 0 0 is set at the factory. This code is used when accessing and setting jukebox configurations. Consider changing the security code so that only authorized persons can change the configurations. NOTE: Don't forget your security code. If you forget it, only your service representative can reset the security code to the factory setting so you can set a new code. Start with READY or SECURE in the display. 1. Press NEXT until CONF * displays 2. Press ENTER. CONF 0 and a flashing 0 displays. 3. Press NEXT until CONF 17 displays. NOTE: Starting from when you press ENTER in the next step, you are prompted to enter the current security code. 4. Press ENTER. CODE 1 and a flashing 0 displays. 5. Press NEXT until the first number of your current security code displays. 6. Press ENTER. CODE 2 and a flashing 0 displays. 7. Press NEXT until the second number of your current security code displays. 8. Press ENTER. CODE 3 and a flashing 0 displays. 9. Press NEXT until the third number of your current security code displays. 10. Press ENTER. NOTE: If you entered an incorrect code, NO CONFIG displays briefly and then CONF 17 displays. Repeat steps 4-10 again and enter the correct current code. 14
![](/manual_guide/products/hewlettpackard-surestore-125ex-hewlettpackard-surestore-125ex-optical-jukebox-user146s-guide-c111890000-9f82d67/53.png)