HP Surestore 125ex Hewlett-Packard SureStore 125ex Optical Jukebox User - Page 69
Hanging, Ukebox, Ontroller
View all HP Surestore 125ex manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
3 NEXT PREVIOUS JUMP CONTENTS INDEX OPERATING THE JUKEBOX The jukebox controller uses two SCSI IDs if your jukebox has one drive and three IDs if your jukebox has two drives. The jukebox controller is assigned one ID and one ID is assigned to each disk drive. The default SCSI IDs are as follows • jukebox controller = 3 disk drive 1 (lower drive) = 4 disk drive 2 (upper drive in a two-drive model) = 5 If you are already using one of these IDs for your host bus adapter or another SCSI peripheral device, follow the directions in one of the next two sections to change either the jukebox controller or a drive ID. CHANGING THE JUKEBOX CONTROLLER ID Start with READY or SECURE in the display. 1. Press NEXT until SCSI ID * displays. 2. Press ENTER. AC ID * displays. ("AC" is the "jukebox controller.") 3. Press ENTER. AC ID 3 displays. 4. Press NEXT or PREV until the ID you want displays. 5. Press ENTER. SET # (# is a number from 0-7) displays briefly and then AC ID * displays again. The ID you chose is now set. 6. Press CANCEL two times to return to the READY state. 30