HP Surestore E Tape Library Model 2/20 HP SureStore E Tape Library Models 2/20 - Page 102

NOTE NOTE Library Administration Configuring the Library To correctly set caching for Internet Explorer™, go to the Windows Control Panel and select [Internet]. Click on the [General] tab. In the Temporary Internet Files section, click on the [Settings] button. Select [Every Visit to the Page], and click on the [OK] buttons to exit. (Netscape Communicator™ and Netscape Navigator™ set caching automatically.) Configuring the Remote Management Card The library only requires one remote management card, which will already be installed when the library arrives. The library administrator password is required for this process. If the password is not set, you will not be permitted to configure your remote management card from your web browser. (See "Enabling and Changing the Password" on page 3-5.) 1. Connect to the network port of the card using a category 5 ethernet cable. Ensure that the cable is also connected to an active network port. 2. On the library's back panel, verify that the link LED on the remote management card is green. If the LED is not green, a link has not been established with the local network. Ensure the network port is active by checking with your system administrator. (See Table 4-3 on page 4-20 for a description of the LEDs.) 3. Enter the Network Access menu. Main Menu -> Administration -> Change Configuration -> Network Access 3-12 Chapter 3