HP Surestore E Tape Library Model 2/20 HP SureStore E Tape Library Models 2/20 - Page 30
Clip Nuts 60-Slot Library, the rack depth, and attach to the back clip nuts.
![]() |
View all HP Surestore E Tape Library Model 2/20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Figure 1-5 Library Installation Installing the Library into a Rack Clip Nuts (60-Slot Library) NOTE Front Back 2. Align the upper (black) rail with the top two clip nuts and loosely install a screw into each clip nut. Slide the rail out so that it equals the rack depth, and attach to the back clip nuts. To allow for enough clearance, do not tighten these screws until you have installed the library. Ensure that you are using the appropriate holes in the upper rail to allow enough clearance, illustrated in Figure 1-6. The clearance between the top and bottom rails should be: 20-slot library = 21.6 cm (8.5 in); 40-slot library = 43.2 cm (17 in); 60-slot library = 64.8 cm (25.5 in). 1-14 Chapter 1
![](/manual_guide/products/hewlettpackard-a5585a-hp-surestore-e-tape-library-models-220-440-660-english-users-guide-b826092/30.png)
Library Installation
Installing the Library into a Rack
Chapter 1
1-14
Figure 1-5
Clip Nuts (60-Slot Library)
2.
Align the upper (black) rail with the top two clip nuts and loosely
install a screw into each clip nut. Slide the rail out so that it equals
the rack depth, and attach to the back clip nuts.
To allow for enough
clearance, do not tighten these screws until you have installed the
library.
NOTE
Ensure that you are using the appropriate holes in the upper rail to allow
enough clearance, illustrated in Figure 1-6.
The clearance between the top
and bottom rails should be: 20-slot library = 21.6 cm (8.5 in); 40-slot
library = 43.2 cm (17 in); 60-slot library = 64.8 cm (25.5 in).
Front
Back