HP Tc2120 HP Server Ultra 3 SCSI Host Bus Adapter Installation and Configurati - Page 47
Novell NetWare Installation, Installing the Driver When Installing NetWare, NetWare 5.0/5.1/6.0
UPC - 808736945332
View all HP Tc2120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
5 Novell NetWare Installation This chapter explains how to install the HP Ultra3 Family Manager Set driver adpt160m.ham for Novell NetWare- NetWare 5.0, 5.1, and 6.0. If you are performing a first time NetWare installation, see "Installing the Driver When Installing NetWare" in the next section. If NetWare is already installed in your system, see "Installing the Driver When NetWare is Already Installed" on page 44. Installing the Driver When Installing NetWare To install the adpt160m.ham driver when you install NetWare, follow the instructions below for the version of NetWare you are installing. NetWare 5.0/5.1/6.0 Follow these instructions only if you are installing NetWare 5.0, 5.1 or 6.0 for the first time: 1. Begin installation of NetWare 5.0 on your server as instructed in your NetWare documentation. 2. When a screen appears that asks you to add device drivers, select Modify and press Enter. 3. Select "Storage adapters," and press Enter. 4. Press Insert to add storage drivers. 5. Press Insert to add an unlisted driver. 6. Insert the HP Ultra3 Family Manager Set disk for NetWare into your floppy disk drive. 7. Press F3 and enter path to the HP Ultra 3 SCSI Host Bus Adapter driver for the version of NetWare being installed. 8. Select adpt160m.ham and press Enter. 9. Select "Return to driver" list, and press Enter. 10. To install additional adapters, follow the procedures from Step 4. 11. When complete, select Continue to complete the installation. 41