HP Tc2120 HP Server Ultra 3 SCSI Host Bus Adapter Installation and Configurati - Page 51
Using the Load Command Line Options, adpt160m.ham, load c:\nwserver\adpt160m verbose=y
UPC - 808736945332
View all HP Tc2120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Chapter 5 Novell NetWare Installation load [pathname]adpt160m.ham [options] For example, the command line to load the driver from the c:\nwserver directory, with the verbose= option on is: load c:\nwserver\adpt160m verbose=y Command line options are not case sensitive. Placing commas between command line options is optional. See "Using the Load Command Line Options" for possible values. To modify the startup.ncf file, follow these steps: NOTE You can also use your DOS text editor to modify the startup.ncf file. 1. Type load install at the NetWare prompt and press Enter. 2. Select the appropriate menu choice that allows you to edit the startup.ncf file. 3. Make the necessary changes. When you are done, press Esc. Using the Load Command Line Options You can specify several command line options when the driver is loaded. The available options are described in the table below. This table describes command line options for the adpt160m.ham driver for Ultra3 SCSI host bus adapter. 45