HP Tc2120 HP Server Ultra 3 SCSI Host Bus Adapter Installation and Configurati - Page 55
Using NetWare and the Host Adapter, Using Removable Media
UPC - 808736945332
View all HP Tc2120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Chapter 5 Novell NetWare Installation Using NetWare and the Host Adapter This section contains useful information on using NetWare and your host adapter. Using Removable Media The adpt160m.ham driver module fully supports removable-media disk drives, including magneto-optical drives. Removable media is treated as a standard SCSI hard disk, with some exceptions: • The driver only recognizes and registers media with 512 bytes/sector. • NetWare allows you to mount/dismount the media, and to lock/unlock the media. NetWare's monitor.nlm program supports several removable-media options. Follow these steps to view and configure these options: 1. Load monitor.nlm to display the various options. 2. Select Disk Information. All system disk drives appear. 3. Select the removable-media device. The following drive status items appear: Table 5-3. Drive Status Menu Choice 1. Volume Segments On Drive1 2. Read After Write Verify1 3. Drive Light Status1 4. Driver Operating Status1 5. Removable Drive Mount Status2 6. Removable Drive Lock Status2 Default Value (select for list) Hardware Level Not Supported Active Mounted Not Locked 1Valid for both removable and non-removable types of SCSI disk drives. 2Valid for removable media only. Mount Status Mounting causes a drive to come on-line as a NetWare storage device. Dismounted drives are inactive and cannot be accessed. 49