HP Workstation x4000 hp workstation x4000 - Getting Started Guide - Windows (A - Page 24
Using Power Management - ram
View all HP Workstation x4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Setting Up And Using Your Workstation Using Your x4000 Workstation Using Power Management Power management lets you reduce the workstation's overall power consumption by slowing down the workstation's activity when it is idle. For more information on power consumption data, refer to the x4000 Technical Reference on HP's web site (www.hp.com/go/workstationsupport). Operating systems differ in their power management capabilities. In Windows 2000, you can select from two power management modes: • Stand By is a low power state where the processor is shut off, but the rest of the machine remains powered. Waking up the workstation from Stand By mode is faster than from Hibernate mode because the RAM contents do not need to be restored. However, when the workstation is in Stand By mode, it consumes more power than Hibernate mode because the memory remains powered. • Hibernate (if enabled) makes the machine look and behave like it is off except that it remembers the state it was in before hibernation and can be awakened without a full operating system boot. This is because the operating system copies the RAM contents out to a special location on the hard disk before entering hibernation. You must enable Hibernate mode through Power Options in the Control Panel before it can be a shut down option. To wake the workstation from either mode, press the power button for less than four seconds. To change your power management settings: 1. Select Start > Settings > Control Panel. 2. Double click on Power Options. For more information on changing your power options, refer to your Windows 2000 or Windows XP documentation. 24 Chapter 1