HP Workstation x4000 hp workstation x4000 - Getting Started Guide - Windows (A - Page 36
Table 2-1, Diag LED Patterns R = Red, Y = Yellow, G = Green, l = Off
View all HP Workstation x4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Troubleshooting Understanding the Diag LEDs Table 2-1 Diag LED Patterns (R = Red, Y = Yellow, G = Green, l = Off) Pattern RRYY Error Fatal internal processor error (#IERR). RYYl No memory detected. RYYY Corrupted memory. YRll BIOS is in crisis recovery mode. YYRl GRll 3.3v circuitry error. BIOS recovery complete. GYRl GGRY lYRY lYRG 1.8V power circuitry error. Battery voltage error. Battery may be at the end of its life. 12V power circuitry error. 2.5 RDRAM power circuitry error. Suggested Solutions Restart. If it's a random event and not due to hardware, it should not recur. Insert or reseat the RIMMs. Reseat the memory expander card. Reseat the memory expander card. Reseat the RIMMs. Wait until the BIOS recovery operation is complete (indicated by LED pattern GRll). Follow the solution steps for the GRll pattern. Reseat I/O cards. If you have set system switch 2 on the system board to On, turn it Off and reboot the system. Reseat the memory expander card. Reseat the battery. Replace the battery. Reseat the I/O cards. Reseat the memory expander card. If the memory expander card has a separate voltage regulator module, reseat the module. 36 Chapter 2