HP XP20000/XP24000 HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 130

Table 137 M/F DCR Operation Item LDKC:CU:LDEV Define Description The LDKC, CU, and LDEV numbers of the logical volume (for a mainframe system) where Cache Residency is set The setting status of Cache Residency Set: set, Delete: cancel Mode The setting mode of Cache Residency - Indicates a dash (-) when Define is Delete Bind: Bind mode, Priority: Priority mode Prestaging Indicates whether the Prestaging mode set is enabled or disabled. Indicates a dash (-) when Define is Delete. No: Prestaging mode is disabled, Yes: Prestaging mode is enabled Start CC-HH End CC-HH Num of DCR Settings The starting cylinder number (CC) and the starting head number (HH) which the Cache Residency is set or canceled The ending cylinder number (CC) and the ending head number (HH) which the Cache Residency is set or canceled The number of Cache Residency which has been set or canceled New Installation Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx,GMT,[Install],New Installation,,Normal end,,,Seq.=xxxxx +Micro Program={Minimum Config,DKCMAIN,RAMBOOT,LCP,HTP,LCDG,FCDG}, Num. of Kind=7 [Install] Install function New Installation New Installation operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in Table 138 (page 130). Table 138 New Installation Operation Item Micro Program Num. of Kind Description The type of microcode installed. The number of each type of installed microcode. Open DCR (Cache Residency Manager) Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Install],Open DCR,,Normal end,,,Seq.=xxxxx +LDKC:CU:LDEV=0x00:0x00:0x00 ++{Define,Mode,Prestaging,Start LBA,End LBA}=[{Set,Bind,No,0,2015}, {Set,Priority,Yes,3636,4175},{Delete,-,-,3636,4175}],Num. of DCR Setting=3 [Install] Install function Open DCR 130 Install Function