HP XP20000/XP24000 HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 232

Detailed information displays for this operation, as shown in Table 288 (page 232). Table 288 System Disk Options operation Item Option Set Result Num. of Modes Description The name of a system disk option. The setting status. Disable or Enable will appear. The result of the operation. Normal: Normal end, Error: Abnormal end The number of system disk options. Volume Initialize Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx,00:00,[VLL],Volume Initialize,,Normal end,,,Seq.=xxxxxx +{PG,LDKC:CU:LDEV}=[{XX-XX-(X),0xXX:0xXX:0xXX},{XX-XX-(X),0xXX:0xXX:0xXX}],Num. of PGs=2 [VLL] Virtual LVI / Virtual LUN function Volume Initialize Volume Initialize operation No parameter No parameter is selected in the above example. This operation uses the following parameters, as shown in Table 289 (page 232). Table 289 Parameters for Volume Initialize Operation Parameter Non Format Quick Format Description Unformatted Volume Initialize. The logged information indicates that the volume was created. Quick Formatted Volume Initialize. The logged information indicates that the formatting was only requested, but not finished. NOTE: No parameters are selected for any case other than those described in this table. The logged information indicates that the formatting was only requested, but not finished. Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in Table 290 (page 232). Table 290 Volume Initialize Operation Item Description PG The parity group numbers The parity group number whose first letter is E indicates that an external volume is present in the parity group. LDKC:CU:LDEV The LDKC, CU, and LDEV numbers None is output when the LDKC, CU, and LDEV numbers are not specified Num. of PGs The number of parity groups 232 VLL Function