HP XP20000/XP24000 HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 229

39 VLL Function Install CV Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[VLL],Install CV,,Normal end,,,Seq.=xxxxxx +{PG,LDKC:CU:LDEV,Start LBA,Emulation,Size,Unit,System Disk }= [{XX-XX-(X),0xXX:0xXX:0xXX, XXXXXXXX,OPEN-V,XXXXXXXX,KB,Disable}, {X-X-(X),0xXX:0xXX:0xXX,XXXXXXXX,OPEN-V,XXXXXXXX,KB,Disable}],Num. of LDEVs=2 [VLL] Virtual LVI / Virtual LUN function Install CV Install Customized Volume (CV) operation No parameter No parameter is selected in the above example. This operation uses the following parameters, as shown in Table 283 (page 229). Table 283 Parameters for Install CV Operation Parameter Non Format Quick Format Description Unformatted Install CV. The logged information indicates that the volume was created. Quick Formatted Install CV. The logged information indicates that the formatting was only requested, but not finished. NOTE: No parameters are selected for any case other than those described in this table. The logged information indicates that the formatting was only requested, but not finished. Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in Table 284 (page 229). Table 284 Install CV Operation Item Description PG The parity group number The parity group number whose first letter is E indicates that an external volume is present in the parity group. LDKC:CU:LDEV Start LBA The LDKC, CU, and LDEV numbers The start LBA A hyphen (-) is output when not specified. Emulation Size Unit The emulation type The user-specified capacity The unit of the CV capacity. The output unit is different according to the setting. KB: For open-system volume Cyl: For mainframe-system volume LBA: When LBA is specified Install CV Operation 229