HP XP20000/XP24000 HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 97

Table 84 AddVolume(FIBRE) Operation (continued) Item Inflow Description The inflow control set to the cache of the mapped external volume Enable: Enabled, Disable: Disabled Result The result of the operation Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end xxxx: Part code, yyyyy: Error code Port WWN LUN Num. of Paths LDKC:CU:LDEV LDEVCapa(blocks) SSID Num. of LDEVs Num. of Volumes The port name of the external port of the local storage system The WWN of the Target port of the external storage system The LUN of the external volume The number of mapping path (Port-WWN-LUN) configured The LDKC, CU, and LDEV numbers of the LDEVs in the mapped external volume. The number on the left of the colon is an LDKC number, the number between the colons is a CU number, and the number on the right of the colon is an LDEV number The capacity of LDEVs in the mapped external volumes indicated by blocks The SSID The number of LDEVs in the mapped external volumes The number of mapped external volumes BlockPaths(FIBRE) Operation This logged information indicates that the Disconnect-Paths operation was only requested, but not finished . user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Ext Stor],BlockPaths(FIBRE),,Normal end,,,Seq.=xxxxx +{Port,WWN,Result}=[{1A,50560E8000C3E211,Normal end},{1A,50560E8000C3E211,Normal end}, {2A,50560E8000C3E212,Normal end}],Num. of Paths=3 [Ext Stor] HP XP External Storage Software function BlockPaths(FIBRE) BlockPaths(FIBRE) operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in Table 85 (page 97). Table 85 BlockPaths(FIBRE) Operation Item Port WWN Description The port name of the external port of the local storage system. The WWN of the Target port of the external storage system. BlockPaths(FIBRE) Operation 97