HP XP20000/XP24000 HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 136

Detailed Information Detailed information displays for this operation, as shown in Table 147 (page 136). Table 147 Set Fibre Address Operation Item Port Fibre Addr. Description The name of the port that the fibre address has been set. The address of Fibre Channel port after change using a number from 1 to 126. See "Output Values to Detailed Info and Addresses of Fibre Channel Port" (page 161) for relation of number and Fibre Channel port address. Num. of Ports The number of ports where address has been set. Set Fibre Topology Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Install],Set Fibre Topology,,Normal end,,,Seq.=xxxxx +{Port,Fabric,Connection}=[{XX,Enable,FC-AL},{XX,Disable,FC-AL},{XX,Enable,P-to-P}, {XX,Disable,P-to-P}],Num. of Ports=4 [Install] Install function Set Fibre Topology Set Fibre Topology operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in Table 148 (page 136). Table 148 Set Fibre Topology Operation Item Port Fabric Description The name of the port where the topology of Fibre Channel is set. Indicates whether the Fabric switch is enabled or disabled. Enable: Enabled, Disable: Disabled Connection The connecting mode of the Fabric switch selected. FC-AL: FC-AL is selected, P-to-P: P-to-P is selected Num. of Ports The number of ports where the topology of Fibre Channel is set. Set Host Mode Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Install],Set Host Mode,,Normal end,,,Seq.=xxxxx +{Port,HostGrpID,Mode,option[0:31],Option[32:63],Option[64:95]}=[{XX,0xXXX, 0x00,0xXXXXXXXX, 0xXXXXXXXX,0xXXXXXXXX},{XX,0xXXX,0x4F,0xXXXXXXXX,0xXXXXXXXX,0xXXXXXXXX}], Num. of Host Groups=2 [Install] Install function Set Host Mode Set Host Mode operation Normal end 136 Install Function