HP XP20000/XP24000 HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 69

Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in Table 54 (page 69). Table 54 Function Switch Operation Item Switch Description Each bit position (on/off) of the function switch information assigned by 64 bits. The beginning of the string is bit 0 and the ending of it is bit 63. "0" indicates the bit is off, and "1" indicates the bit is on. In the example above, bit 3 and bit 5 are on and the other bits are off. Paircreate Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Cnt Ac],Paircreate,,Normal end,,,Seq.=xxxxxx +{P-VOL(Port-G-ID-LUN),S-VOL(Port-G-ID-LUN),S/N,LDKC,ID,ControllerID,Type, Initial Copy, Fence Level,Copy Pace,Priority,Diff,CTG, Error Level,Result}= -{1A-0x00-0x000,GR-0xFE-0x3FF,99999,0x00,Default,4,Async,Entire,Never,15,032, Auto,0x00, Group,Normal End}, (snip) -(snip), Num. of Pairs=xx [Cnt Ac] HP XP Continuous Access Software function Paircreate Paircreate operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in Table 55 (page 69). Table 55 Paircreate Operation Item P-VOL (Port-G-ID-LUN) S-VOL (Port-G-ID-LUN) S/N LDKC ID Description The port number, host group number, and LUN of the volume specified to the primary volume when the pair is created sequentially The port number, host group number, and LUN of the volume specified to the secondary volume when the pair is created sequentially The serial number of the device The LDKC number of the paired LDKC The path group ID or SSID When the path group ID is default setting, the output is Default Controller ID Type The controller ID The update copy mode set Sync: Synchronous mode, Async: Asynchronous mode Paircreate Operation 69