HP Xw6200 Adaptec SCSI RAID 2120S: Software Reference Guide - Page 154
milliseconds on the currently running create mirror task
UPC - 882780333536
View all HP Xw6200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 154 highlights
Adaptec SCSI RAID Software Reference Guide Examples Before setting the I/O delay on an array, use the container list command to obtain information about any existing arrays. As the following example shows, there is an array 0 (a volume set) on this controller: AAC0>container list Executing: container list Num Total Oth Stripe Scsi Partition Dr Label Type Size Ctr Size Usage C:ID:L Offset:Size F: 0 Volume 10.0MB NTFS 0:02:0 64.0KB: 10.0MB The following example creates a mirror set asynchronously and sets an I/O delay of 20 milliseconds for array 0. You need to perform the create mirror task asynchronously. Otherwise, you cannot change the I/O delay: container create mirror /io_delay=20 0 (0,2,0) Executing container create mirror /io_delay=20 0 (CHANNEL=0,ID=2,LUN=0) The following example shows how to change the I/O delay to 40 milliseconds on the currently running create mirror task: AAC0>container set io_delay 0 40 Executing: container set io_delay 0 40 Use the container list command after using the container set io_delay command to display information about the array, as in the following example: AAC0>container list Executing: container list Num Total Oth Stripe Scsi Partition Dr Label Type Size Ctr Size Usage C:ID:L Offset:Size F: 0 Volume 10.0MB NTFS 0:02:0 64.0KB: 10.0MB As the example shows, there is no difference between the array list display prior to and after the set I/O delay operation. 5-106