HP Xw6200 Adaptec SCSI RAID 2120S: Software Reference Guide - Page 292
The Enclosure and Fan Columns, The Status Column, Enclosure, Status
UPC - 882780333536
View all HP Xw6200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 292 highlights
Adaptec SCSI RAID Software Reference Guide Examples The following example displays the status of all fans on enclosure management devices 0 and 1: AAC0>enclosure show fan Executing: enclosure show fan Enclosure Fan Status 0 0 OK 1 0 NOT INSTALLED As the example shows, the fan status display contains the following columns: ■ Enclosure ■ Fan ■ Status The following sections describe the information that the enclosure show fan command can display in these columns. The Enclosure and Fan Columns The Enclosure column displays the ID associated with the enclosure management device that you specified on the command line. If you did not specify an ID, the enclosure show fan command displays the IDs for all enclosure management devices connected to the controller. In the example, the enclosure show fan command displays enclosure management device IDs 0 and 1. The Fan column displays the unit number associated with the fan that you specified on the command line. If you did not specify a unit number, the enclosure show fan command displays the unit numbers for all fans on the enclosure management device or devices. In the example, there is one fan (unit 0) each on enclosure management devices 0 and 1. The Status Column The Status column displays the status for each fan listed in the display. The enclosure show fan command can display the fan status values listed in Table 11-4. 11-28