HP Xw6200 Adaptec SCSI RAID 2120S: Software Reference Guide - Page 319
UPDATE, Default Switch Values, Examples
![]() |
UPC - 882780333536
View all HP Xw6200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 319 highlights
Using the Adaptec Flash Utility Default Switch Values If you do not include the /C switch, the AFU returns a fatal error message. If you do not include the /D switch, the AFU creates the UFI file in the current default drive and directory. Examples A:\> AFU SAVE /C 0 The AFU saves flash contents from controller 0 to a UFI file in the current default drive and directory. A:\> AFU SAVE /C 1 /D C:\UFI_FILES The AFU saves flash contents from controller 1 to a UFI file in the directory C:\UFI_FILES . UPDATE The UPDATE command updates a controller's flash components from the flash image data in a UFI file. You can use the UPDATE command to update a single controller's flash components or to update multiple controllers on your system. You must reset your system or issue a RESET command following an UPDATE command because this command effectively shuts down the controller's kernel. Default Switch Values If you do not include the /C switch, the AFU returns a fatal error message. If you do not include the /D switch, the AFU looks for its UFI files in the current default drive and directory. Example A:\> AFU UPDATE /C 0 Adaptec Flash Utility V4.0-0 B5749 (c)Adaptec Inc. 1999-2002. All Rights Reserved. Updating Controller 0 (Adaptec 2200S) Reading flash image file (Build 5749) AFU is about to update firmware on controller(s) Adaptec 2200S ***PLEASE DO NOT REBOOT THE SYSTEM DURING THE UPDATE*** 12-11
![](/manual_guide/products/hewlettpackard-xw8200-adaptec-scsi-raid-2120s-software-reference-guide-ea1ed4a/319.png)