HP Xw6200 Adaptec SCSI RAID 2120S: Software Reference Guide - Page 333
Playback Mode, Property, Description
UPC - 882780333536
View all HP Xw6200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 333 highlights
Using the Array Configuration Utility Playback Mode Playback mode enables you to create one or more arrays based on the properties defined in a script file. It also enables you to configure certain properties for each channel on the controller. When you create an array, you can specify any of the properties listed in Table 13-3. Property Type Size Label StripeSize Cache settings Table 13-3 Array Properties Description Supported array types are: ■ Volume ■ RAID 0 (stripe) ■ RAID 1 (mirror) ■ RAID 5 ■ RAID 10 (stripe of mirrors) ■ RAID 50 (stripe of RAID 5) Size of the array to be created. Size can be specified in megabyte (MB), gigabyte (GB), or terabyte (TB) units, or Maximum to specify the maximum size based on the given type and disks. Alphanumeric string uniquely identifying the array. Size (in KB) of contiguous data distributed across a "striped" array (RAID 0, RAID 5, RAID 10, or RAID 50). You can specify the following values for the caches: ■ ReadCache-Yes (enable), or No (disable) ■ WriteCache-One of the following values: Yes-Enable when protected No-Disable Always-Enable always Drives HotspareDrives Disk drives to use in creating the array. Drives are identified by their channel number, ID number, and logical unit number (LUN). Disk drives to assign as spare drives for this array. Drives are identified by their channel number, ID number, and LUN. 13-11