HP Xw6200 Adaptec SCSI RAID 2120S: Software Reference Guide - Page 179
controller firmware compare, C{controller_ID}
UPC - 882780333536
View all HP Xw6200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 179 highlights
controller Commands controller firmware compare To compare the contents of each of the flash components on a controller to the corresponding image in a pair of user flash image (UFI) files and indicate whether they match, use the controller firmware compare command. Syntax controller firmware compare [/C[{controller_ID}][{controller_ID}...] [/D{UFI_file_path}] Switches /C{controller_ID} Specifies the controller ID representing the set of controllers on which to perform the firmware comparison. If you do not specify this switch, this command compares the flash components on controller 0. /D{UFI_file_path} Specifies the path where the pair of UFI files are located. If you do not specify this switch, this command compares the flash components against the pair of UFI files in the current default drive and directory. Examples The following example compares the contents of a controller's flash components to the corresponding image in a pair of UFI files. AAC0> controller firmware compare D:\ Executing: controller firmware compare "D:\" The controller's firmware matches the firmware in the specified flash image files. Related Information: controller commands: ■ controller firmware save (page 6-8) ■ controller firmware update (page 6-10) 6-7