HP Xw6200 Adaptec SCSI RAID 2120S: Software Reference Guide - Page 234
diagnostic clear boot_parameters, technical support.
![]() |
UPC - 882780333536
View all HP Xw6200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 234 highlights
Adaptec SCSI RAID Software Reference Guide diagnostic clear boot_parameters To clear all boot-time parameters contained in the currently opened controller's parameters, use the diagnostic clear boot_parameters command. Under normal conditions, no boottime parameters are set. ! Caution: Use this command only under the direction of technical support. Syntax diagnostic clear boot_parameters Examples The following example clears all boot-time parameters: AAC0> diagnostic clear boot_parameters Executing: diagnostic clear boot_parameters All boot time parameters cleared to default values. Related Information diagnostic commands: ■ diagnostic set boot_parameter (page 8-11) ■ diagnostic show boot_parameter (page 8-12) 8-2
![](/manual_guide/products/hewlettpackard-xw8200-adaptec-scsi-raid-2120s-software-reference-guide-ea1ed4a/234.png)
8-2
Adaptec SCSI RAID Software Reference Guide
diagnostic clear boot_parameters
To clear all boot-time parameters contained in the currently opened
controller’s parameters, use the
diagnostic clear
boot_parameters
command. Under normal conditions, no boot-
time parameters are set.
Caution:
Use this command only under the direction of
technical support.
Syntax
diagnostic clear boot_parameters
Examples
The following example clears all boot-time parameters:
AAC0> diagnostic clear boot_parameters
Executing: diagnostic clear boot_parameters
All boot time parameters cleared to default values.
Related Information
diagnostic
commands:
■
diagnostic set boot_parameter
(
page 8-11
)
■
diagnostic show boot_parameter
(
page 8-12
)
!