HP dx2390 Hardware Reference Guide - dx2390 Microtower Model - Page 17
Removing the Front Bezel
View all HP dx2390 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Removing the Front Bezel 1. Remove/disengage any security devices that prohibit opening the computer. 2. Remove all removable media, such as diskettes or compact discs, from the computer. 3. Turn off the computer properly through the operating system, then turn off any external devices. 4. Disconnect the power cord from the power outlet and disconnect any external devices. CAUTION: Regardless of the power-on state, voltage is always present on the system board as long as the system is plugged into an active AC outlet. You must disconnect the power cord to avoid damage to the internal components of the computer. 5. Remove the computer access panel. 6. Press outward on the three latches on the right side of the bezel (1), then rotate the right side of the bezel off the chassis (2) followed by the left side. Figure 2-3 Removing the Front Bezel Removing the Front Bezel 11