HP dx2390 Hardware Reference Guide - dx2390 Microtower Model - Page 42
CAUTION, Installing the Hard Drive Cage
View all HP dx2390 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
3. Connect the power cable (1) and data cable (2) to the back of the hard drive. Figure 2-32 Connecting the Hard Drive Cables CAUTION: Never crease or bend a SATA data cable tighter than a 30 mm (1.18 in) radius. A sharp bend can break the internal wires. 4. Place the hard disk drive cage into the chassis (1), then slide it down toward the bottom of the chassis until it locks into place (2). Figure 2-33 Installing the Hard Drive Cage 36 Chapter 2 Hardware Upgrades
3.
Connect the power cable (1) and data cable (2) to the back of the hard drive.
Figure 2-32
Connecting the Hard Drive Cables
CAUTION:
Never crease or bend a SATA data cable tighter than a 30 mm (1.18 in) radius. A
sharp bend can break the internal wires.
4.
Place the hard disk drive cage into the chassis (1), then slide it down toward the bottom of the
chassis until it locks into place (2).
Figure 2-33
Installing the Hard Drive Cage
36
Chapter 2
Hardware Upgrades