HP dx2390 Hardware Reference Guide - dx2390 Microtower Model - Page 28
Securing the Expansion Cards and Slot Covers, Installing an Expansion Card
View all HP dx2390 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
11. To install a new expansion card, hold the card just above the expansion socket on the system board then move the card toward the rear of the chassis so that the bottom of the bracket on the card slides into the small slot on the chassis. Press the card straight down into the expansion socket on the system board. Figure 2-13 Installing an Expansion Card NOTE: When installing an expansion card, press firmly on the card so that the whole connector seats properly in the expansion card slot. 12. Replace the slot cover lock and secure it in place with the screw that was previously removed. Figure 2-14 Securing the Expansion Cards and Slot Covers 13. Connect external cables to the installed card, if needed. Connect internal cables to the system board, if needed. 14. Replace the computer access panel. 22 Chapter 2 Hardware Upgrades