HP dx7300 HP Compaq dx7300 Business PC Service Reference Guide, 1st Edition - Page 102
System Board
View all HP dx7300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
Removal and Replacement Procedures- Microtower (MT) Chassis 6.18 System Board 1. Prepare the computer for disassembly (Section 6.1). 2. Remove the access panel and rotate the computer so the system board is parallel to the table to make it easier to work on (Section 6.3). 3. Remove all PCI and PCI Express expansion boards (Section 6.8). 4. Disconnect all cables connected to the system board, noting their location for reinstallation. 5. Remove the 3-1/4" drives from the drive cage to make it easier to handle the system board. 6. Remove the eight screws that secure the system board to the chassis 1, then slide the system board towards the front of the chassis to remove it 2. To install the system board, reverse the removal procedures. 6-34 433611-001 Service Reference Guide, dx7300