HP dx7300 HP Compaq dx7300 Business PC Service Reference Guide, 1st Edition - Page 140
Front I/O Devices
View all HP dx7300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 140 highlights
Removal and Replacement Procedures- Slim Tower (ST) Chassis 7.13 Front I/O Devices 1. Prepare the computer for disassembly (Section 7.1). 2. Remove the computer cover (Section 7.5). 3. Remove the two screws that secure the front I/O device to the chassis 1. 4. Rotate the drive cage to its full upright position. 5. Disconnect the front I/O cable from the system board. 6. Push the front I/O device into the chassis 2 and snake the cable through the tunnel 3 to remove the device from the chassis. To reinstall the front I/O device, reverse the removal procedure. 7-34 433611-001 Service Reference Guide, dx7300
7–34
433611-001
Service Reference Guide, dx7300
Removal and Replacement Procedures— Slim Tower (ST) Chassis
7.13 Front I/O Devices
1. Prepare the computer for disassembly (
Section 7.1
).
2. Remove the computer cover (
Section 7.5
).
3. Remove the two screws that secure the front I/O device to the chassis
1
.
4. Rotate the drive cage to its full upright position.
5. Disconnect the front I/O cable from the system board.
6. Push the front I/O device into the chassis
2
and snake the cable through the tunnel
3
to
remove the device from the chassis.
To reinstall the front I/O device, reverse the removal procedure.