Hikvision DS-7316HQHI-SH User Manual - Page 112
Configuring Privacy Mask, Configuring Tamper-proof
View all Hikvision DS-7316HQHI-SH manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
Configuring Privacy Mask Privacy Mask can be setup to mask off sensitive or private areas in the field of view of a camera. To configure privacy zones: 1. Enter the Privacy Mask menu, shown in Figure 127 by going to Menu > Cameras Setup > Privacy Mask. Figure 127 Privacy Mask Settings Menu 2. Select the camera to setup privacy mask in using the camera dropdown list on the upper left of the menu. 3. Check the Enable Privacy Mask checkbox to enable privacy mask. 4. Up to four privacy masks can be used per camera and are shown using four different colors, yellow, green, blue and grey. Using the mouse, click and drag out rectangular boxes defining the desired zones. 5. You may clear a privacy zone at any time by clicking on the corresponding Clear Zone button or Clear All button to clear all zones. 6. If the same settings can be applied to other channels, click Copy. 7. Select the Apply button to save the privacy mask settings and select to return to the previous menu. Selecting saving settings. without clicking Apply will quit out of the menu without Configuring Tamper-proof Tamper-proof detection can be used to recognize if an area of a camera is purposely covered and to respond accordingly. To configure tamper-proof detection: 1. Enter the Tamper-proof menu, shown in Figure 128 by going to Menu > Cameras Setup > Tamper-proof. . 111