Hikvision DS-7316HQHI-SH User Manual - Page 66
Instant edit
View all Hikvision DS-7316HQHI-SH manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Figure 65 Record Schedule Configuration Menu 3. Select the camera to configure from the camera dropdown list. 4. Check the Enable Schedule checkbox to enable the record schedule. If the checkbox is unchecked, the record schedule will be disabled. 5. Edit the record schedule. There are three ways to set the record schedule: Instant edit 1) On the Record menu, select a day from Monday to Sunday to configure schedule for. 2) Setup time periods for schedule. If the 24HR checkbox is checked, recording will occur over the entire day. To setup multiple time periods, uncheck 24HR and enter the Start/End Time for the selected day. The start/End time are listed using a 24 hr cycle (i.e. 18:00 is equivalent to 6:00pm). Up to 8 discontinuous periods can be configured for each day. 3) Select recording type under Type for selected day of the week. Recording type includes Continuous for continuous recording or Event when an event is triggered (i.e., from detected motion) for the selected time period. 4) Select the Add button to add time frame to schedule. The newly added time frame will appear in the schedule on the right. You can click to delete the selected time period on the right. Continuous recordings are shown in blue on the schedule while Event recordings are shown in yellow. An example of this can be seen in Figure 66. 65